🥇India mein pehli baar - ONLY Calibrated Ply, Life-time guarantee ke saath!
Wigwam Fabricate Club
Wigwam Fabricate Club
With a sleek modern look and powerful performance, Wigwam’s Fabricate Club Flush Doors are hybrid doors crafted to offer both appealing aesthetics and exceptional functionality, along with outstanding thermal efficiency.
Available In
- 30mm
- 32mm
- 35mm
- 38mm
USPs and Features
- All side frames are made of Australian Pine Wood and filled with melia-dubia
- Resistant to Termites
- 30 years Guarantee (no cashback)
- Gurjan Face Veneer
- Immune to Microbes
- Made with Direct Pressing Technology
- Boiling water proof
- Powered by Hexacore Technology
- Conforms to IS:2202
Technical Specifications
Grade
BWP/MR
Face
Okoume Face Veneer
Core
Eucalyptus
Length
+2~5 MM
Thickness Tolerance
+/-0.25 MM
Whether Calibrated
Both Side Calibrated
No. of Ply
19MM - 5 Layers, 25MM - 9 Layers
Edge Straightness
0.30%
Core Gap
NIL on Top Core
Swelling (24 Hrs)
4% ~ 6%
Moisture Resistant Test
Conforms to BWP Grade (IS 1659)
Species Used
Poplar/Okoume/Eucalyptus
Back
Okoume Face Veneer
Size of Plywood
2440 x 1220 mm
Width
+2~5 MM
Face Veneer Thickness
0.30 MM
Glue Used
Phenol Formaldehyde (PF)
Squareness
0.30%
Density
625 ~ 675 Kg/m3
Moisture Content
5% ~ 12%
Ply Overlap
NIL on Top Core
Swelling % (48 Hrs)
8% ~ 12%
Baton Layer
Poplar
Applications
- Indoor Panels and Shutters, Single Doors, Double Leaf Doors, Bathroom Doors, etc
Technical Specifications
| SI. No. | Tests | Requirement as per IS:2202 (Pt-1): 1999 | Results |
|---|---|---|---|
|
1. |
a). Dimensions, mm |
Height ±5mm (nominal dimensions) Width ±5mm (nominal dimensions) Thickness ±1mm (nominal dimension) Variation in the thickness between any two points – not more than 0.8mm |
+2.5 0 0.10 0.78 |
|
|
b). Squareness, mm |
Deviation not more than 1mm per 500 mm length |
0.40 |
|
2. |
General Flatness, mm |
Twist, cupping and warping not greater than 6mm |
1.2 |
|
3. |
Local Plane-ness, mm |
Depth of deviation not greater than 0.5mm |
0.17 |
|
4. |
End Immersion Test |
No delamination |
Conforms |
|
5. |
Glue Adhesion Test |
No delamination |
Conforms |
|
6. |
Knife Test |
Minimum pass standard |
Excellent |
|
7. |
Impact Indentation, mm |
No cracking, tearing or delamination Depth of indentation not greater than 0.2mm |
Conforms
0.1 |
|
8. |
Slamming |
No visible damage after 50 drops |
Conforms |
|
9. |
Flexure (deflection in mm) |
Deflection at maximum load not greater than 1/30 length and |
56.73 |
|
|
15 mins after loading 50kg |
1/15 of width, whichever is less |
|
|
|
3 mins after load removal |
Residual deflection not greater than 1/10 maximum deflection |
2.52 |
|
10. |
Shock Resistance Soft and Light Body Impact Soft and Heavy Body Impact |
No visible damage No visible damaget |
Conforms Conforms |
|
11. |
Buckling (deflection in mm) |
No deterioration |
Conforms |
|
|
After 5 mins. of 40kg loading |
Initial deflection not greater than 50mm |
54.85 |
|
|
15 mins. after load removal |
Residual deformation after 15 minutes of unloading not greater than 5mm |
11.15 |
|
12. |
Edge Loading (deflection in mm) |
|
|
|
|
After 15 mins. of 100kg loading |
Deflection at max. load not greater than 5mm |
2.26 |
|
|
3 mins after load removal |
Residual deflection after removal of load not greater than 0.5 mm |
2.16 |
|
|
Lateral Buckling |
Not more than 2mm during loading |
1.5 |
|
|
Residual Lateral Buckling |
No residual lateral buckling after load remova |
Conforms |
|
13. |
Screw withdrawal strength, N |
Not less than 1000 Surface condition: no visible damage to the surface either by delamination or extra chipping off at the points of withdrawal |
2148 Conforms |
|
14. |
Varying Humidity Test |
No visible warping, twisting or delamination Maximum departure from the general plane-ness not more than 1mm Recovery – At least 90% of the change in dimension |
Conforms 0.5 98.2 |
|
15. |
Misuse |
No permanent deformation of the fixing or any other part of the door set in hindering its normal working after test |
Conforms |
